Vehicle OBDII Tools 365 Days Shop

V4.7.8 VVDI2 Commander Key Programmer Full Version Newly Add BMW FEM/BDC Function

V4.7.8 VVDI2 Commander Key Programmer Full Version Newly Add BMW FEM/BDC Function

VVDI2 Full Version comes with Basic Function + VW + BMW + Porsche+PSA+ AUDI Generation 5 Function+BMW OBD Fucntion+BMW CAS4+ Functions +Tango + J2534, with vvdi2 commander key programmer full version for VW/Audi/BMW/Porsche/PSA, you don't Need to buy other Authorization any more. VVDI2 Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, BMW Multi Tool, CAS4 Adapter, Tango & J2534.

vvdi2 full v4.7.8

vvdi2 full v4.7.8 Software Download Link


VVDI2 latest software version V4.7.8 update Details:

************************************************ ********************
*** 2017-10-30 
*** Require firmware V4.7.8 
************************************************ ********************
===== VAG V4.7.8 =====
1. Improvement for copy 48 (96 bit), reduce the server calclation time. All the custer update to latest V4.7.8 for copy function
2. Bugfix

===== BMW V4.7.8 =====
1. Bugfix

===== Porsche V4.7.8 =====
1. Bugfix

===== PSA V4.7.8 =====
1. Bugfix

===== Transponder Programmer V4.7.8 =====
1. Bugfix

===== J2534 V4.7.8 =====
1. Bugfix

===== Online Upate Tool V4.7.8 =====
1. Bugfix

===== Quick Start V4.7.8 =====
1. Bugfix

VVDI2 - BMW FEM/BDC System 
(function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car 
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.


vvdis bmw fem/bdc system
vvdis bmw fem/bdc system

If you are interested in vvdi2 commander key programmer full version, you can visit our page to order or contact vobdii.com team to get best offer and service.

VOBDII.COM

Focus on vehicle diagnostic tool and service since 2008!
-------------------------------------------------------------------------------
Sales: Serena
Skype: autodiagnostickit
Whatsapp: +86-13728823315
Email: info@vobdii.com
Facebook: https://www.facebook.com/vobdii/

Post A Comment